Solder

Why Do We Use Solder?

Solder is a combination of tin and lead used to create a strong bond between other metals. Since solder won’t stick to glass, we apply a copper foil tape (our metal) to the edges of the glass. This is referred to as the copper foil method of stained glass construction. Solder is melted over the copper foil, creating a structure that holds the pieces of glass together. The other option is to set the glass into channels of lead or metal, and solder the channels together. This is referred to as the lead came method.

The Advantages of Solder

• Solders are easy to use and relatively inexpensive.
• Low energy is required to solder.
• Properly soldered joints are highly reliable.
• Solder joints are easy to rework or repair.
• Experienced craft persons can exercise a high degree of control over the soldering process.
• Solder joints age very well. They can last for years, decades and centuries.

Types of Solder

Stained glass solders are usually a mixture of tin and lead, designated by two numbers representing the percentages of each metal in that specific mix. The first number always refers to the percentage of tin, the second is the percentage of lead. The most commonly used solders in stained glass are 60/40, (60% tin/40% lead) 50/50 and 63/37. "Lead-free" solders have no number designation and are a mixture of tin and small amounts of other metals. Avoid solders containing antimony, a very toxic element. Instead look for lead-free solders containing silver, or copper. They are safer and easy to use. (Note they are, however, more difficult to patina.)

In North America, you will find solder is generally sold in solid core wire form on a spool. The common spool size is one pound. In Europe, you will find solders primarily sold in a bar form. Never use acid-core or rosin-core solders for stained glass work. Look for solders that are sold as "free of impurities" in the component metals. Impurities cause a "scum" on your solder bead, degrade soldering iron tips, and interfere with the proper reaction of patina chemicals resulting in undesired finishes.

An important term for solders is the "working range" or "pasty range." This is the range of temperature between which solder transitions from liquid back to solid.

| More in Stained Glass | Find a Retailer | Find a Studio | Visit our Sponsors | StoreFinder Home Page |